Patch Panel Enclosure (Box)
HellermannTyton (HT-Hellermann-Tyton) HTNetwork
Fiber Optic Enclosure (Box) 4U Rack Mount 72/96/144 Unloaded
FERM72S (UPC: 08930626194)
HellermannTyton's rack mount fiber enclosures are the ideal direct
termination and splice solution of LAN applications capable of
supporting up to 144 fibers. While offering easy-to-use front slide-out
trays for easy access to connections, enclosures are equipped with cable
management and cable routing accessories to limit bend radius and add
strain relief control.
Descriptions:
> Slide out tray
> Raised front edge to assist tray pull out
> Removable front and rear access lids
> Tinted plexiglass window (2U, 3U & 4U)
> Wire management rings
> Support post for splice trays
> Lanced tabs to support incoming jacketed fiber
> Accepts 12 Adapter Panels and 4 Fiber Splice Tray (Part Number: FERMST)
> Dimensions: 7(h) x 17(w) x 12.14 (d)
> Shipping weight: 22 lbs.
Specifications:
FIBER OPTIC
ENCLOSURES
1. GENERAL
1.1 SCOPE
This specification covers fiber optic enclosure products used in
data/communications wiring installations. The fiber optic enclosure
products shall consist of wall mount fiber enclosures and rack mount
fiber enclosures.
1.2 CLASSIFICATION AND USE
Fiber optic enclosures are to be utilized in dry interiors.
1.3 SUBMITTALS
1.3.1 SHOP DRAWINGS
For installations, submit drawings for approval showing the complete
layout of all products that make up the complete system for each floor
prior to installation with the number and types of fiber optic
enclosures.
1.3.2 AS BUILT DRAWINGS
If variations from approved shop drawings occur during the installation
of the system, final, as built drawings, shall be submitted for each
floor that has been altered.
2. PRODUCT
2.1 MANUFACTURER
The fiber optic enclosures specified herein for data/communications
wiring installations shall be the fiber optic enclosures manufactured by
HellermannTyton. Other manufacturer’s systems may be considered equal
if, in the opinion, and the written approval of the engineer, they meet
all the performance standard specified herein.
2.2 MATERIALS
The fiber optic enclosure products are equipped with cable
management and cable routing accessories to limit bend radius and add
strain relief control. These rugged fiber optic enclosures can
accommodate splicing and direct termination of fiber optic enclosures.
Material and work specified herein shall comply with the applicable
requirements of ANSI/TIA/EIA – 568-B - Telecommunications Cabling
Standard.
2.2.1 WALL MOUNT FIBER OPTIC ENCLOSURES
The wall mount fiber enclosures provide a termination solution for LAN
applications requiring fully enclosed and lockable wall mount
enclosures. Designed to support up to two to four modular adapter panels
for 12, 16, 24 or 36 strand fiber terminations.
2.2.2 RACK MOUNT FIBER OPTIC ENCLOSURES
The rack mount fiber enclosures are designed to be easily mounted on
standard 19" or 23" relay racks. These enclosures are the ideal direct
termination and splice solution for LAN applications, supporting up to
96 fibers. The enclosures are available in 1U, 2U and 4U sizes. The 1U
enclosure has a unique swing out tray while the 2U and 4U enclosures
have fitted hinged front and back panels. Both styles provide easy
access to the fiber.
2.2.2.1 SPLICE TRAY
HellermannTyton offers a 7" fiber splice tray to organize and protect 12
fusion splices for rack mount enclosures. A removable cover protects the
splices while the smooth radiused side design helps to prevent damage to
fibers when routing.
2.2.2.2 FIBER OPTIC ADAPTER PANELS HellermannTyton offers several panels
with various adapters including ST, SC, MTRJ and LC. Assembled with
industry standard adapters for single mode and multimode applications.
The fiber optic adapter panels easily snap into the
enclosures with snap lock mounting fixtures. Panels are available with
3, 6 or 8 adapters.
3. EXECUTION
3.1 INSTALLATION
Prior to and during installation, refer to the system layout drawing or
installation instructions containing all elements of the system. Work
shall include furnishing all fiber optic enclosures to install a system
as indicated on the data/communications drawings and in the
specification. Installer shall comply with detailed manufacturer’s
instruction sheets, which accompany the fiber optic enclosures.
Compatible Fiber Adapter Panels:
(a) Modular Adapter – Blank FAPB
(b) Panel w/ 6 ST MM/SM Adapters FAP6MMST
(c) Panel w/ 6 Simplex SC MM/SM Adapters FAP6SMMSC
(d) Panel w/ 3 Duplex SC MM/SM Adapters FAP3DMMSC
(e) Panel w/ 6 Duplex SC MM/SM Adapters FAP6DMMSC
(f) Panel w/ 6 Duplex LC MM/SM Adapters FAP6DMMLC
(g) Panel w/ 6 MTRJ Adapters FAP6MTRJ
(h) Panel w/ 8 Simplex SC MM/SM Adapters FAP8SMMSC
(i) Panel w/ 8 Simplex ST MM/SM Adapters
FAP8SMMST
Related Products:
FERMST - Fiber Adapter Panels Fiber
Splice Tray for up to 12 fusion splice
FERM18S 18/24 Unloaded, accepts 3 Adapter Panels & 1 FERMST, 1U
1.75"(h) x 17"(w) x 12.14" (d) 15 lbs.
FERM36S 36/48 Unloaded, accepts 6 Adapter Panels & 2 FERMST, 2U
3.5"(h) x 17"(w) x 12.14" (d) 17 lbs.
FERM54S 54/72 Unloaded, accepts 9 Adapter Panels & 3 FERMST, 3U
5.25"(h) x 17"(w) x 12.14" (d) 19 lbs.
FERM72S 72/96/144 Unloaded, accepts 12 Adapter Panels & 4 FERMST,
4U 7.0"(h) x 17"(w) x 12.14" (d) 22 lbs. |
